Filter
Top Products
available to service the operation. This can be because all the drives are mounted by
other processes or sessions, or the device type was incorrectly specified.
System Action: The attempted operation is terminated.
User Response: Use the QUERY DRIVE command to check the online status of
the drives. Drives that are marked ″Unavailable since hh:mm yy/mm/dd″ are drives
taken offline by the server at the time specified because of hardware failures or the
inability to open the drive. If the attempted operation is a CHECKIN or LABEL
command, use the QUERY MOUNT command to determine if all the drives in the
library are mounted and wait until one of these is available. If there are mounted
volumes with an IDLE status, use the DISMOUNT VOLUME command to free its
drive, and retry the original operation. Finally, the DEVTYPE parameter is required
for CHECKIN and LABEL commands specifying 3590 volumes in a 349X library
that also contains 3490 drives. This is because this library also supports 3490
volumes, and the default device type on CHECKIN and LABEL commands is
CART (3490).
ANR8848W Drive drive name of library library name is inaccessible; server has begun
polling drive.
Explanation: The server is unable to use the mentioned drive. This may be for the
following reasons:
¶ The drive cannot be opened
¶ In the case of a 3494 or a library that can be partitioned, the drive may be
unavailable to the library manager, may be in use by another application, or
may be loaded with a cartridge not labeled for server use.
System Action: The drive is temporarily made offline and is not used for tape
operations. The server polls the drive at one-half minute intervals to check if the
condition has cleared. Once the drives is accessible again, the drive is brought
online.
User Response: Determine the reason the drive is inaccessible, such as hardware
errors reported in the system logs. Render any needed corrections to the drive. The
drive will be brought online automatically when the polling process detects that is
has become accessible.
ANR8849E Command: There is already a request to delete drive drive name.
Explanation: The designated drive cannot be deleted or updated because there is a
request to delete the drive already.
System Action: The command is not processed.
User Response: None.
1007
Tivoli Storage Manager Messages
3. Common and Platform
Specfic Messages