Filter
Top Products
User Response: If the session is ended as a result of intentionally stopping either
the client or server, no response is required.
ANR8292W (Solaris)
Session terminated when no data was read through Shared Memory.
Explanation: The server is unable to read data from Shared Memory. This may be
a normal event if either side of the connection is abruptly ended.
System Action: The session is ended. Server operation continues.
User Response: If the session is ended as a result of intentionally stopping either
the client or server, no response is required.
ANR8292W (Windows NT)
IPX/SPX connection terminated - insufficient memory.
Explanation: The server cannot accept a client session due to a memory allocation
request failure.
System Action: Server operation continues.
User Response: The most likely cause is a lack of memory. Ensure that there is
sufficient space for the Windows NT paging file. Click on the system icon in the
Windows NT control panel and then click on the virtual memory button. Refer to
the on-line help for instructions on how to increase the amount of virtual memory.
You may also wish to cut down on the maximum number of sessions that the server
can accept with the MAXSESSIONS option in the server options file.
ANR8293W (AIX)
Shared Memory driver unable to initialize due to socket initialization error.
Explanation: While initializing Shared Memory communications, the server failed
to set up an interface with TCP/IP.
System Action: Server operation continues, but the server cannot accept sessions
from clients using the Shared Memory protocol.
User Response: Ensure that TCP/IP has been started and is active on your system.
You may issue the TCP/IP ping command to your own address to verify that TCP/IP
is both started and active.
ANR8293E (AS/400)
This server is not licensed to support the device type device type. Device
Support Module module number is required.
Explanation: A DEFINE DRIVE command or a volume mount operation cannot
be processed because the server is not licensed to support the required device type.
876
Version 3 Release 7