Filter
Top Products
ANR8793E Dynamic drive recovery failed for device type volume volume name because not
enough drives are available.
Explanation: To recover a volume on another drive, there must be at least one
other drive available that is not associated with the transaction which is driving the
recovery. In addition, the maximum number of drives that can have dynamic drive
recovery performed at the same time is one less than the number of drives. This is
to prevent deadlock from occurring between two recovering transactions. One of
these criteria has failed.
System Action: No DDR is performed and the transaction fails.
User Response: Restart the transaction.
ANR8794E Retry of operation name operation failed for device type volume volume name.
Explanation: After successfully mounting the volume on another drive, due to an
I/O error, the original operation fails when retried.
System Action: No further recovery is performed and the transaction fails.
User Response: Restart the transaction.
ANR8795I Retry of operation name operation for device type volume volume name is
successful.
Explanation: After mounting the volume on another drive, due to an I/O error, the
operation is tried successfully.
System Action: The transaction continues from the point of interruption from the
failure.
User Response: None.
ANR8796W Drive drive name of library library name is not online; UPDATE DRIVE
required.
Explanation: During the initialization of a library, the server finds that the drive
was updated to be offline.
System Action: The drive will not be accessible by the library during tape
operations.
User Response: The drive may be made online by issuing the UPDATE DRIVE
command with the ONLINE=YES option.
994
Version 3 Release 7