Filter
Top Products
User Response: Ensure that IPX/SPX is operational on your system by using the
network control panel applet. If IPX/SPX is not started, issue the HALT command
to stop the server, and then restart the server.
ANR8243W (AIX)
Unable to open APPC connection connection: errno error number.
Explanation: The server cannot open the connection with the client.
System Action: Server operation continues, but APPC communications is not
established.
User Response: Make sure the default side information profile IDEFAULT exists
and retry the operation.
ANR8243W (Windows NT)
Unable to establish IPX/SPX connection - insufficient memory.
Explanation: The server is unable to accept a client session due to a memory
allocation request failure.
System Action: Server operation continues, but the session request for this session
fails.
User Response: Ensure that there is sufficient space for the Windows NT paging
file. Click on the system icon in the Windows NT control panel and then click on
the virtual memory button. Refer to the on-line help for instructions on how to
increase the amount of virtual memory. You may also wish to cut down on the
maximum number of sessions that the server can accept with the MAXSESSIONS
option in the server options file.
ANR8244W (Windows NT)
IPX/SPX driver unable to initialize due to socket initialization error.
Explanation: While initializing IPX/SPX communications, the server has failed to
set up an interface with IPX/SPX for Windows NT.
System Action: Server operation continues, but the server cannot accept sessions
from clients using the IPX/SPX protocol.
User Response: Ensure that IPX/SPX is properly installed on your system. Ensure
that IPX/SPX has been started on your system. Verify that IPX/SPX is both installed
and active on your system by using the network control panel applet.
841
Tivoli Storage Manager Messages
3. Common and Platform
Specfic Messages