Filter
Top Products
User Response: Make sure the library and drive devices associated with this
command are powered on and ready. Reissue the command.
ANR8908I CLEAN DRIVE for drive drive name in library library name completed
successfully.
Explanation: The specified drive is successfully cleaned in the library during
processing of a CLEAN DRIVE command.
System Action: The drive is available for normal library operations.
User Response: None.
ANR8909I Cleaning drive drive name in library library name- CANCEL PENDING.
Explanation: In response to a QUERY PROCESS command, this message
displays the status for a CLEAN DRIVE process on the server.
System Action: The background process operation is terminated.
User Response: None.
ANR8910I No cleaner, or no cleaner with cleanings left, found in library library name.
Explanation: A drive is selected to be loaded with a cleaner cartridge, but no
cleaner, or cleaner with cleanings left, is found in the library’s inventory.
System Action: The drive is available for normal library operations.
User Response: A cleaner should be checked in to the library by issuing the
CHECKIN LIBVOL command.
ANR8911W The cartridge in storage element slot element address in library library name is
not a cleaner cartridge as was expected.
Explanation: The cartridge is listed in the library’s inventory with a cleaner
volume status. After loading the cartridge in the specified storage cell into a drive
for cleaning, it is determined that it is not a cleaner cartridge.
System Action: The drive is available for normal library operations.
User Response: The cartridge should be checked out of the library by issuing the
CHECKOUT LIBVOL command. If necessary a cleaner cartridge should be
checked in to replace it.
1014
Version 3 Release 7