Filter
Top Products
User Response: None.
ANR2464I Command: Volume history files have NOT been defined for automatic history
recording - specify a file name for recording history information.
Explanation: This message is displayed in response to the BACKUP
VOLHISTORY. It indicates that sequential volume history information cannot
automatically be written because no files were defined in the server options file for
recording this information.
System Action: The sequential volume history information is not written. Server
operation continues.
User Response: Reissue the BACKUP VOLHISTORY command and specify the
name of a file for recording sequential volume history information. If desired, you
may configure files that should be automatically updated with the
VOLUMEHISTORY parameter and restart the server.
ANR2465E Command: An I/O error was encountered in writing sequential volume history
information to one or more of the defined volume history files.
Explanation: The BACKUP VOLHISTORY command does not complete
successfully because the server cannot write to one or more of the defined volume
history files.
System Action: The server does not process the command.
User Response: Examine error messages on the server console that may have been
displayed prior to this message and correct any problems, if possible. Make sure
that the server has proper authority to write to the file indicated and that sufficient
space is available in the file system for the file. On MVS, make sure that the data
set has been allocated and that the server has authority to write to the data set.
ANR2466E Command: An internal server error was encountered in writing sequential
volume history information to one or more of the defined volume history files.
Explanation: The BACKUP VOLHISTORY command does not complete
successfully because the server cannot write to one or more of the defined volume
history files.
System Action: The server does not process the command.
User Response: Examine error messages on the server console that may have been
displayed prior to this message and correct any problems, if possible. Contact your
service representative if you are unable to resolve the problem.
374
Version 3 Release 7