Filter
Top Products
This error is logged by the ADSM device driver when the
device reports a particular hardware error or
command-aborted error in response to a SCSI I/O command.
Detail Data: Sense Data
The sense data consists of information that can determine the
exact cause of the error; in this case, which hardware
component failed and why. To interpret the sense data for a
particular device, refer to the device’s SCSI specification
manual.
ADSM_DD_LOG3 (0x461B41DE)
MEDIA ERROR
This error is logged by the ADSM device driver when a
SCSI I/O command fails because of corrupted or
incompatible media, or because a drive requires cleaning.
Detail Data: Sense Data
The sense data consists of information that can determine the
exact cause of the error. To interpret the sense data for a
particular device, refer to the device’s SCSI specification
manual.
ADSM_DD_LOG4 (0x4225DB66)
TARGET DEVICE GOT UNIT ATTENTION
This error is logged by the ADSM device driver after
receiving certain UNIT ATTENTION notifications from a
device. UNIT ATTENTIONs are informational and usually
indicate that some state of the device has changed. For
example, this error would be logged if the door of a library
device was opened and then closed again. Logging this event
indicates that the activity occurred and that the library
inventory may have been changed.
Detail Data: Sense Data
The sense data consists of information that describes the
reason for the UNIT ATTENTION. To interpret the sense
data for a particular device, refer to the device’s SCSI
specification manual.
1404
Version 3 Release 7