Filter
Top Products
User Response: Ensure that there is sufficient space for the Windows NT paging
file. Click on the system icon in the Windows NT control panel and then click on
the virtual memory button. Refer to the online help for instructions on how to
increase the amount of virtual memory.
ANR8202W (AIX)
Unable to initialize TCP/IP driver - error creating acceptor socket. Reason code
reason code.
Explanation: Because TCP/IP rejects a request for a socket on which to listen, the
server cannot start communications through TCP/IP.
System Action: Server operation continues, but the server cannot accept sessions
from clients using the TCP/IP protocol.
User Response: Ensure that TCP/IP is operational on your system by using the
ping command with your TCP/IP address as a target. If TCP/IP is not started, use
the HALT command from a server prompt to stop the server and restart it.
ANR8202W (AS/400)
Unable to initialize TCP/IP driver - error creating acceptor socket.
Explanation: The ADSM server cannot communicate by way of TCP/IP. TCP/IP
has rejected a request for a socket on which the server listens.
System Action: Server operation continues, but the server cannot accept sessions
from clients using the TCP/IP communication protocol.
User Response: Ensure that TCP/IP is operational on your system by using the
ping command with your TCP/IP address as a target. If TCP/IP is not started, issue
the ADSM HALT command to stop the server, and then restart the server.
ANR8202E (HP-UX)
Unable to initialize TCP/IP driver - socket bind operation for port TCP port
number failed; error error code.
Explanation: The server is unable to initialize the TCP/IP driver due to a socket
binding error.
System Action: Server operation continues, but TCP/IP support is inoperative.
User Response: Ensure that TCP/IP is operational on your system by using the
ping command with your TCP/IP address as a target. If TCP/IP is not active on your
system, you must activate it; then halt and restart the server. This message may also
result from more than one server running on the same machine with the same
TCP/IP port number. Make sure that the dsmserv.opt file TCPPort option is different
for each server.
799
Tivoli Storage Manager Messages
3. Common and Platform
Specfic Messages