Filter
Top Products
Table 3. Completion Code Values for Media Changers (continued)
Decimal Hexadecimal Description Recommended Action
316 X'13C' Cleaner cartridge installed Contact TSM support.
Completion Code Values for Tape and Optical Drives
The following table shows the completion code values, in decimal
and hexadecimal numbers, for tape and optical drives. It provides a
description for the I/O error message and the recommended action.
After performing the recommended action, retry the failing
operation. If the failing operation is not successful, contact TSM
support.
Table 4. Completion Code Values for Tape and Optical Drives
Decimal Hexadecimal Description Recommended Action
400 X'190' Physical end of media encountered Ensure the heads are clean on the
drive.
402 X'192' Media corrupted Ensure the heads are clean and the
media is not physically damaged or
too old.
403 X'193' Media failure. Ensure the heads are clean and the
media is not physically damaged or
too old.
404 X'194' Media incompatibility Ensure the correct length and type
of media is being used.
406 X'196' Sector requested is invalid. Internal server error
Contact TSM support.
407 X'197' Write protect Ensure the volume is not write
protected.
408 X'198' Clean the media and the drive. Clean the drive heads with a
cleaning cartridge that is not too old.
409 X'199' Media fault Clean the heads and ensure the
media is not physically damaged or
too old.
410 X'19A' Cleaning complete Retry the failing operation.
1396
Version 3 Release 7