Tivoli Audio Version 3 Release 7 Portable Media Storage User Manual


  Open as PDF
of 1473
 
ANR8202E (Solaris)
Unable to initialize TCP/IP driver - socket bind operation for port TCP port
number failed; error error code.
Explanation: The server is unable to initialize the TCP/IP driver due to a socket
binding error.
System Action: Server operation continues, but TCP/IP support is inoperative.
User Response: Ensure that TCP/IP is operational on your system by using the
ping command with your TCP/IP address as a target. If TCP/IP is not active on your
system, you must activate it; then halt and restart the server. This message may also
result from more than one server running on the same machine with the same
TCP/IP port number. Make sure that the dsmserv.opt file TCPPort option is different
for each server.
ANR8202W (Windows NT)
Unable to initialize TCP/IP driver - error creating acceptor socket.
Explanation: The server is unable to communicate by way of TCP/IP. TCP/IP has
rejected a request for a socket on which the server listens.
System Action: Server operation continues, but the server cannot accept sessions
from clients using the TCP/IP protocol.
User Response: Ensure that TCP/IP is operational on your system by using the
ping command with your TCP/IP address as a target. If TCP/IP is not started, issue
the HALT command to stop the server, and then restart the server.
ANR8203W (AIX)
Unable to establish TCP connection - accept error.
Explanation: The server cannot accept a client session due to a failure in TCP/IP.
System Action: Server operation continues, but the server cannot accept sessions
from clients using the TCP/IP protocol.
User Response: Ensure that TCP/IP is operational on your system by using the
ping command with your TCP/IP address as a target. If TCP/IP is not started, use
the HALT command from a server prompt to terminate the server and restart it.
ANR8203W (AS/400)
TCP has run out of buffer space - server will retry when buffer space is
available.
Explanation: The ADSM server cannot send data to clients because no buffer
space is available in TCP/IP data buffer.
800
Version 3 Release 7