Filter
Top Products
ANR8785E Out-of-space in file system for device type volume volume name.
Explanation: The server detected an out-of-space condition for the file system in
which the given volume resides.
System Action: The operation fails.
User Response: The file system must be expanded to accommodate volume
growth.
ANR8786I Request number: Remove device type volume from entry/exit port; insert volume
volume name mount mode into entry/exit port of library library name within time
limit minute(s); issue ’REPLY’ along with the request ID when ready.
Explanation: A CHECKIN LIBVOLUME command is in progress, and the
specified volume is needed. However, there is a volume awaiting to be removed
from the entry/exit port before the specified volume is inserted into the port of the
given library.
System Action: The server waits until a REPLY command is issued.
User Response: Remove the volume from the library and insert the correct volume
into the entry/exit port. Issue a REPLY command, along with the request ID, to tell
the server that the volume has been removed and a new volume has been inserted.
ANR8787W No barcode labels detected in library library name.
Explanation: A command is issued with the CHECKLABEL=BARCODE option.
The library is unable to detect that the cartridges have valid barcode labels. The
barcode reader is disabled or it is unable to read the labels.
System Action: Unless the command is checking in cleaning cartridges, the
process continues by loading the cartridges into the library’s drives and reading the
label from the tape. Cleaning cartridges have no internal label that can be checked
by loading it in the drive.
User Response: Cancel the process if you do not want to load all of the cartridges
into the library’s drives. Examine the cartridges to ensure they have barcode labels
and they are compatible with the barcode reader. Not all vendors’ labels are
readable by all libraries. Check that the barcode reader is configured and
functioning properly, if necessary.
ANR8788W Unable to read the barcode of cartridge in slot-id Element number of slot in
library library name; loading in drive to read label.
Explanation: The library barcode reader is unable to read the label of a tape
cartridge. The cartridge is found in the slot with the given element number.
992
Version 3 Release 7