Filter
Top Products
Chapter 3
68
Exabyte 440 and Exabyte 480
LCD Interface mode
When the library is operating in LCD Interface mode, you can
control the motions of the CHM from the operator panel.
Note: You can use many operator panel features without
changing to LCD Interface mode. LCD Interface mode is
required only when you want to control the motions of
the CHM from the operator panel.
9-Pin and 25-Pin Port modes or
25/ 9 Pin mode
When the library is operating in a serial port mode (9-Pin or 25-Pin
Port mode for narrow libraries; 25/9 Pin Port mode for wide
libraries), you can control the motions of the CHM from a remote
console program connected to the library’s 9-pin or 25-pin port.
Note: Use the 9-Pin, 25-Pin, or 25/9 Pin mode to control CHM
motion only. You do not need to change the control mode
to access a tape drive’s serial port.