Filter
Top Products
Appendix A
148
Exabyte 440 and Exabyte 480
International 220 VAC Power Cord
The power cord must have an attachment plug of the proper
type, rating, and safety approval for the intended country.
The power cord must have an IEC 320 female connector on
one end.
The flexible cord must be harmonized to CENELEC
publication HD-21. The electrical characteristics and rating
must be minimum H05VVF3G0.75 (6 A).
SCSI terminator specifications
The SCSI terminator must match the SCSI bus configuration
(single-ended, LVD, or HVD, and wide or narrow). In addition,
all termination must be external. Do not use internal terminators
to terminate the library or the tape drives.
To ensure proper performance of the library and tape drives,
Exabyte recommends one of the following external terminators:
Note: For best results on a single-ended bus, use active
termination.
Exabyte testing has shown that older passive termination does not
provide rising edge transitions that are fast or clean enough at fast
SCSI speeds.
External terminator specifications
Narrow Single-ended AMP Amplimite 750381-1
HVD AMP Amplimite 796051-1
Wide LVD AMP Amplimite 796051-1
HVD AMP Amplimite 869515-1