Filter
Top Products
Configuration
Installation and Operation
57
Set Time
The Set Time option allows you to set the time that is shown on
the library’s Main Screen and Command History screen (see
page 106). To set the time:
1. From the Configuration Menu, select Set Time. The following
screen appears:
2. Use
4
and
6
to toggle through the selections under HH
(hours), MM (minutes), and SS (seconds). Use
and
0
to
toggle between the columns.
3. Press
>(QWHU@
to save your changes and exit the Set Time screen.
S e t H H : M M : S S
T i m e : 2 0 : 2 2 : 0 9
↑ →
↓