Filter
Top Products
Hardware Exercises
Installation and Operation
123
Cycle
Pick/Place
Causes the CHM to take a
cartridge from a specified
element and replace it in the
same location.
When you select Cycle Pick/Place, the Set
Source screen appears. Press >@ or >@ to
select the source index (where you want
the CHM to pick and place the cartridge),
and press >(QWHU@. The Set Cycles screen
appears. Press >@ or >@ to select the
number of cycles you want this test to run
and press >(QWHU@.
Cycle
Gripper
Causes the CHM gripper to
open and close the number of
times you specify.
When you select Cycle Gripper, the Set
Cycles screen appears. Press
>@
or
>@
to
select the cycles for the Cycle Gripper test
to run and press
>(QWHU@
.
Cycle S
Axis
Causes the CHM to move end
to end along the short axis
(the axis on which the CHM
moves in and out).
When you select Cycle S Axis, the Set
Cycles screen appears. Press
>@
or
>@
to
select the number of cycles you want the
Cycle S Axis test to run and press
>(QWHU@
.
Cycle L
Axis
Causes the CHM to move end
to end along the long axis (the
axis on which the CHM moves
up and down).
When you select Cycle L Axis, the Set
Cycles screen appears. Press
>@
or
>@
to
select the number of cycles you want the
Cycle L Axis test to run and press
>(QWHU@
.
Cycle
Drum
Rotates the drum assembly
180 degrees.
When you select Cycle Drum, the Set
Cycles screen appears. Press
>@
or
>@
to
select the number of cycles you want the
Cycle Drum test to run and press
>(QW HU @
.
Cycle
Solenoid
Exercises the solenoid that
controls the locking
mechanism on the front door.
When you select Cycle Solenoid, the Set
Cycles screen appears. Press
>@
or
>@
to
select the number of cycles you want the
Cycle Solenoid test to run and press
>(QW HU @
. You will hear a click each time the
solenoid extends and retracts.
Cycle E/E Extends and retracts the
entry/exit port.
When you select Cycle E/E, the Set Cycles
screen appears. Press
>@
or
>@
to select
the number of cycles you want the Cycle
E/E test to run and press
>(QWHU@
.
Diagnostic
test
Description Additional instructions