Filter
Top Products
Chapter 7
122
Exabyte 440 and Exabyte 480
Scan Scans all of the elements. After the system scans all the elements,
it stores the data in the cartridge
inventory and displays any scan errors on
the Label Information screen (see
page 108).
Scan with
Range
Scans a range of bar code
labels.
When you select Scan with Range, the
Set Scan Start screen appears. Press >@
or >@ to specify an element index where
you want the scanner to begin, and press
>(QWHU@
. The Set Scan Stop screen appears.
Press
>@
or
>@
to specify an index where
you want the scanner to stop, and press
>(QW HU@
. After the system scans the labels, it
stores the data in the cartridge inventory
and displays any scan errors on the Label
Information screen (see page 108).
Home
Gripper
Causes the gripper to move to
its home position (open). This
test also recalibrates the
home or zero position for the
gripper.
Home
CHM
Causes the CHM to move in
and out on the short axis,
move up and down on the
long axis, rotate the drum
assembly to its home position
(with cartridge magazine 0 to
the front), and open and close
the gripper.
This test also recalibrates the
home or zero position for the
long axis, the short axis, the
gripper, and the drum.
Diagnostic
test
Description Additional instructions