Filter
Top Products
Chapter 3
54
Exabyte 440 and Exabyte 480
Setting the remaining configuration options
The Configuration Menu contains other configuration options
described in the following sections. If desired, you can check these
settings and change them.
SCSI Parity
The SCSI Parity option allows you to enable parity checking for
the library (if the SCSI adapter card connected to the library
supports it). When this option is enabled, the library checks all
data coming across the SCSI bus for parity. The setting you specify
remains in effect across power cycles.
Note: Parity checking can also be enabled and disabled by the
application software using a SCSI MODE SELECT
command. The method last used to set parity checking
(LCD or SCSI command) has precedence.
Parity checking for tape drives is set separately. See the
tape drive’s SCSI reference for more information.
To change SCSI parity:
1. From the Configuration Menu, scroll until the screen arrow
points to SCSI Parity.
2. Press
and
0
to toggle parity checking on and off.
3. Press
>(VFDSH@
to return to the Main Menu.