Filter
Top Products
Hardware Installation
Installation and Operation
17
Step 1 – Install the rack-mount library
If you have a rack-mount library, follow these instructions to
install it into a standard EIA 19-inch rack. If you have a standalone
library, go to “Step 2 – Unlock and open the door” on page 24.
:$51,1*
The rack-mount library weighs
137–179pounds (62–81 kg); the standalone
library weighs 190 – 238 pounds (86 – 110 kg).
You need at least 4 people, or 2 people and a
small fork lift, to lift either model.
Make sure you install the library in the lowest
possible location in the rack and that the rack is
equipped with extension support legs.
Make sure you extend the support legs before
installing the library in the rack or when sliding
it out of the rack. If you do not have extension
support legs, use an additional person to
counterweight the back of the rack or cabinet.