Filter
Top Products
Configuration
Installation and Operation
59
Note: SCSI MODE SELECT security prevents the same activities
as LCD security, except for opening the front door.
The method used to enable security (LCD or SCSI) must also be
used to disable security. That is, if you enable security from the
operator panel, you must disable it from the operator panel. If
security is enabled by the application (SCSI), it must be disabled
by the application.
Note: To determine if security has been set by your application,
look at the SCSI Mode Parameters screen (see page 96).
Security remains in effect across library resets.
Enabling security from the operator panel
1. From the Configuration Menu, select Set Security On. The
library displays the following screen:
Note: If the menu displays Set Security Off, the security
option has already been enabled.
S e t S e c u r i t y O n :
E n t e r P a s s w o r d 0 0 0
T h e n ↑
P r e s s E n t e r
→