Filter
Top Products
Hardware Installation
Installation and Operation
27
To prepare and install cartridges:
1. Affix a bar code label to each cartridge by positioning the label
as shown in the following figure, using the recessed area on
the cartridge for guidance. Make sure you orient the label
correctly.
For information on how to prepare bar code labels, refer to the
Exabyte Bar Code Label Specification for 8mm Cartridges.
➤ Important If you remove a bar code label from
a cartridge without replacing it, make sure you
clean the label area thoroughly. Bar code labels can
leave adhesive on the label area, which may cause
the cartridge to stick to the gripper.