Filter
Top Products
Configuration
Installation and Operation
53
3. Press >@ to move the screen arrows to D3, as shown. Press >@
or >@ until the screen displays the SCSI ID you want.
Note: If any drive carrier slot contains a drive blank, the
cursor will skip over the SCSI ID field for that slot.
4. Continue this process until you have set the SCSI IDs for all
tape drives and the library.
5. When the SCSI IDs for all tape drives and the library are
correct, press
>(QWHU@
to accept your choices.
6. If you have changed one or more of the tape drive IDs, the
following screen appears:
7. Press
>(QWHU@
. The library resets the tape drives with changed IDs
and returns to the Configuration Menu.
S C S I D 4 D 3 D 2 D 1 L I B
I D s : 0 5 0 4 0 3 0 2 0 1
↑
← ↓ →
P r e s s E N T E R t o r e s e t
t h e d r i v e ( s ) o r E S C
t o c a n c e l t h e S C S I
I D c h a n g e s .