Filter
Top Products
Chapter 7
126
Exabyte 440 and Exabyte 480
➤ Important If you connect a serial port to an
Eliant 820 tape drive, you may interrupt any SCSI
commands being sent to that drive from the
application software.
5. When you have selected the option you want, press >(QWHU@. The
library configures the port and displays a confirmation
message. Press >(VF D SH@ to exit this message.
6. Press >@ to select a baud rate for the port and press >(QWHU@. The
library assigns the baud rate and an asterisk (*) indicates the
current connection.
Note: Use 9600 baud to communicate with the tape drive.
If you connected to a tape drive to perform tape drive
diagnostics, be aware that the library changes back to the
default setting, Diag Console, after the library door has been
opened and closed or after the library has been reset.
➤ Important If you attempt to exit the Config Port
menu while the library is still connected to a tape
drive, the library displays a message that instructs
you to change the port setting back to Diag
Console.