Filter
Top Products
Chapter 8
132
Exabyte 440 and Exabyte 480
✔ CHM operation. You can use the selections in the Diagnostics
Menu and the Demo Menu to determine if the CHM is
functioning properly. See Chapter 7.
✔ Fuse. Check to make sure that the fuse is good. See page 135
for instructions.
If you cannot resolve the problem...
If you cannot resolve the problem, call your service provider.
Before calling, gather the following information:
For the library: serial number (found on the Serial Number
screen on the LCD or on the rear panel), firmware number
(found on the Main Screen of the LCD), and SCSI
configuration (single-ended, LVD, or HVD, narrow or wide).
For the tape drives: model, serial numbers (found on the top
of the tape drive housing) and FECODE and EECODE
numbers (found on the top of the tape drive housing). (See
page 140 for instructions about removing a tape drive.)
For the host computer: operating system, computer brand
name and model, type of host bus adapter card installed, and
application software name and version number.