Filter
Top Products
Maintenance
Installation and Operation
141
Procedure for replacing a tape drive (or drive
blank)
Replacing a tape drive (or drive blank) involves the following
steps:
Note: When you order a new tape drive for the library, the tape
drive will be shipped to you in a drive carrier. You cannot
install a tape drive into the library without a drive carrier.
Step 1 – Prepare for replacement procedure
1. Obtain a flat-blade screwdriver.
2. To avoid damaging the library, be sure that the work area is
free of conditions that could cause electrostatic discharge
(ESD). If possible, use an antistatic mat and grounded static
protection wristband during installation. If a mat and
wristband are not available, touch a known grounded surface,
such as the computer’s metal chassis.
✓
Step Description
1 Prepare for replacement procedure.
2 Remove the tape drive from the library.
3 Install a drive blank or tape drive in the library.
4 Resume library operations.