Filter
Top Products
Configuration
Installation and Operation
61
Note: If the menu displays Set Security On, the LCD security
function is disabled. However, security may have been
enabled by your application using a SCSI command.
If so, it must be disabled by your application (see your
software documentation or the EXB-440 and EXB-480
8mm Libraries SCSI Reference).
2. To enter the three-digit password, press >@ and >@ to move
from column to column and >@ and >@ to change the numbers.
When you are finished, press >(QWHU @ .
If you forget the password Try entering the default
password (000). If the default password has been changed and
you do not know what it is, call your service provider.
Set Serial Number
The serial number is entered into the library firmware at the
factory. If you want to check that number, look at the serial
number label on the back of the library or use the Set Serial
Number option. The serial number displayed on this screen
appears on diagnostic listings.
Note: If the serial number has never been entered, the number
stored in memory is 99999999.