Filter
Top Products
Tape Drive Operation
Installation and Operation
91
The following table shows additional fields on the Mammoth
Drive Status screen.
Occupied 0 – There is no cartridge loaded in the tape drive.
1 – There is currently a cartridge loaded in the tape drive.
Occ Valid 0 – The door has been opened or some other interruption has
occurred so the occupied information may not be reliable.
1 – The occupied information is reliable.
Mammoth Drive Status
Cart Displays the status of a data cartridge, if any, in this tape drive.
Loaded – A cartridge is in the tape drive and the tape is loaded into the
tape path.
Loading – A cartridge is being loaded into the tape drive.
Unloading – A cartridge is being unloaded from the tape drive.
Present – A cartridge is in the tape drive, but the tape is not loaded in
the tape path.
Empty – The tape drive does not contain a cartridge.
Tape left Displays how much tape is left, in megabytes, on the cartridge currently
in the tape drive.
Tape size Displays the total amount of tape, in megabytes, on the cartridge
currently in the tape drive.
Tape fmt Displays the data format of the cartridge currently in the tape drive.
PO Sec Displays the power-on seconds.
Mo. Sec Displays the tape motion seconds.
Serial Displays the tape drive’s serial number.
BOOT Displays the code level of the tape drive’s boot ROM.
FLASH Displays the code level of the tape drive’s flash EPROM.
Drive Status screen
(continued)