Filter
Top Products
Specifications
Installation and Operation
147
Pow er
Pow er cord requirements
The library is shipped with a 7-foot (2.1 meter), 18 AWG,
3-conductor AC power cord for 120 volt use in the United States
and Canada. The power cord has a molded NEMA 5-15P male
connector on one end and a molded IEC 320 female connector on
the other end. The power cord is UL Listed and CSA Certified.
Other voltages and international use
If you are planning to use an input voltage other than 120 volts
AC, or if you plan to use the library outside of the United States
or Canada, you must supply your own power cord. Requirements
for these power cords follow.
U.S. and Canadian 220 VAC Power Cord
The power cord must have a molded NEMA 6-15P attachment
plug on one end.
The power cord must have a molded IEC 320 female connector
on the other end.
The cordage must be an SJT-VT type, 3-conductor, 18 AWG
minimum.
The power cord must comply with local electrical code.
Input voltages Accepts 100 to 240 VAC at 50 to 60 Hz;
automatic input voltage selection
Power consumption
(AC true power)
95 watts minimum; 145 watts maximum.
Based on the AC true power consumption,
the library generates between 325 and 495
BTU/hour.