Filter
Top Products
LCD Error Codes
Installation and Operation
165
71
PARAM ETER > LIM IT.
Firmware error.
Make sure the library and tape drives are not
being used by any host, then press
>5HVHW@ on
the operator panel.
If the error persists, contact your service
provider. You may be asked to supply a
diagnostic listing, and you may need new
firmware.
72
FRONT DOOR OPEN. The
front door is open or the door
solenoid is malfunctioning.
Close and lock the door.
If the error still appears, make sure the library
and tape drives are not being used by any
host, then press
>5HVHW@ on the operator panel.
If the error persists, contact your service
provider.
73
S SERVO TIMEOUT. The CHM
could not reach its destination
along the short axis.
Open the door and look for anything that
might be obstructing the CHM along its short
axis.
Make sure the library and tape drives are not
being used by any host, then press
>5HVHW@ on
the operator panel. If the error persists,
contact your service provider.
75
INTERNAL S/W ERROR.
Firmware error.
Make sure the library and tape drives are not
being used by any host, then press
>5HVHW@ on
the operator panel.
If the error persists, contact your service
provider. You may be asked to supply a
Diagnostic listing, and you may need new
firmware.
76
POS ERROR TIMEOUT. The
CHM could not reach its
destination along the long
axis.
Open the door and look for anything that
might be obstructing the CHM along its long
axis.
Make sure the library and tape drives are not
being used by any host, then press
>5HVHW@ on
the operator panel. If the error persists,
contact your service provider.
Error Description Corrective action