Filter
Top Products
Chapter 2
38
Exabyte 440 and Exabyte 480
Connecting the narrow library to the SCSI bus
Narrow SCSI libraries have eight connectors and can operate on
up to four SCSI buses. The library and Drive 1 share connectors
and must operate on the same SCSI bus. Drives 2 through 4 can
operate on individual buses.
To connect the narrow library to the SCSI bus:
1. Connect the library to the SCSI bus, using the connector
assignments shown in the following figure.
2. Install SCSI cables as required to connect the library devices
to the other devices on the SCSI bus.