Filter
Top Products
Chapter 2
12
Exabyte 440 and Exabyte 480
Step 2 – Obtain accessories and equipment
Make certain you have all the accessories and equipment for
library operation, as indicated in the table below. Many of these
items are included in the library accessories box (a separate box at
the top of the carton).
Required accessories and equipment
Power cord Included with the library.
(Page 147 provides power cord
specifications for other voltages
and international use.)
Two keys for the front door Included with the library.
Jumpers for connecting the
library and tape drives to a single
SCSI bus.
Included with the library (three
for narrow SCSI libraries and four
for wide SCSI libraries).
Twelve screws and ten clip nuts
(see page 17 for specific sizes)
Included with rack-mount
libraries.
Two slide rails
SCSI cables If these items are not included
with the library, contact Exabyte
to purchase them. If you want to
use your own, see page 148 for
specifications. Visit the Exabyte
web site (www.exabyte.com) for
a list of approved vendors.
SCSI terminator(s) (required if
the library or one of the tape
drives is the last device on the
bus)
Data cartridges and cleaning
cartridges
If cartridges are not included with
the library, contact Exabyte to
purchase them. If you want to
use your own, refer to page 71
for appropriate data cartridges
and to page 85 for appropriate
cleaning cartridges.