Filter
Top Products
87
Controlling the AR-3000R from an External Device
Applications
Playback is repeated while the control signal is continuously
input.
fig.14-07e
First-In Playback
The phrase played back earlier is given precedence in
playback.
During phrase playback, even when a new START signal is
input, it is disregarded.
fig.14-08e
Playback is repeated while the control signal is continuously
input.
fig.14-09e
Last-In Playback
The control signal that is input later is given precedence in
playback.
During phrase playback, when a different START signal is
newly input, playback of the current phrase is stopped, and
playback of the specified phrase begins.
fig.14-10e
Playback is repeated while the control signal is continuously
input.
fig.14-11e
Sequence Playback
When a new control signal is input during phrase playback,
the new phrase is then stored (queued).
When playback of the current phrase is finished, the
subsequently specified phrase is played back.
A maximum of 100 phrases can be stored (queued).
fig.14-12e
Even when control signals are input continuously, playback
is conducted one time only and then ends.
fig.14-13e
AR-3000R Settings
If a card in AR-2000 format is inserted in either slot A or B (or
both), the AR-3000R can be used only for playback, and it is
not possible to record phrases or make any settings (except
for card conversion). Also, if you insert a card in AR-2000
format into slot A or B (or both) while making settings
(except for card conversion), operation will halt with an error
message, and cannot be resumed until such cards are
removed. To record or edit cards in AR-2000 format on the
AR-3000R, follow the steps in “Card Convert” (p. 78).
Selecting the Control Input Mode
Select “DIRECT PLAY” from the control input modes
(DIRECT PLAY/PROGRAM PLAY/BINARY PLAY/
BINARY REC).
* You cannot achieve control input playback merely by
connecting a device to the port. Be sure to set the control input
mode to match the method used for connecting to the ports.
Procedure for Setting the Control Input Mode
1.
Press the MODE button.
The MODE indicator lights up.
2.
Use the SELECT dial to choose “5.1 Control Input
Mode,” then press the dial.
3.
Turn the SELECT dial to choose “DIRECT PLAY,” then
press the dial.
fig.14-g01e
AUDIO OUTPUT
Port No.1
A0001 A0001 A0001
A0002
AUDIO OUTPUT
Port No.1
Port No.2
Disabled
Disabled
AUDIO OUTPUT
Port No.1
A0001 A0001 A0001
A0001 A0002
A0001 Interrupted
AUDIO OUTPUT
Port No.1
Port No.2
AUDIO OUTPUT
Port No.1
A0001 A0001 A0001
A0001 A0002
AUDIO OUTPUT
Port No.1
Port No.2
AUDIO OUTPUT
Port No.1
A0001
Disabled
AR-3000R_e.book 87 ページ ２０１０年３月１８日 木曜日 午後２時６分