Filter
Top Products
60
Modifying Recorded Phrases (Phrase Settings)
* The offset time can be set only when Control Out “ON” is
selected.
5.
When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose “NO,” then press the ENTER button.
Once the settings have been successfully modified, you’re
returned to the setting item selection screen.
6.
Press the MODE button.
This ends the setting process and returns you to the usual
screen.
* While making the settings, you can go back to the previous
entry location (highlighted) by pressing the PAUSE (BACK)
button.
* If you press the MODE button while making settings, a
message asking you to confirm that you want to exit the
setting process appears. Note that if you choose “YES,” then
press the ENTER button, you are returned to the usual screen,
and all setting changes you’ve made up to that point will be
discarded.
Changing the Playback Tempo
for MIDI Phrases (MIDI Playback
Tempo)
This changes the playback tempo for MIDI phrases.
For detailed information about how to use MIDI phrases,
refer to the chapter “Recording and Playing MIDI Phrases”
(p. 82).
Procedure for Setting the MIDI Tempo
1.
Use the SELECT dial to choose the phrase whose setting
you want to change.
2.
Press the MODE button.
The MODE indicator lights up.
3.
Use the SELECT dial to choose “1.8 MIDI Tempo,” then
press the dial.
You can reselect a phrase whose setting you want to change
by pressing the PAUSE (BACK) button. The entry position
(highlighted) moves to the phrase selection, so turn the
SELECT dial to reselect card A or B and the phrase number,
then press the dial.
4.
Turn the SELECT dial to set the MIDI tempo (from 5 to
260), then press the dial.
fig.11-g08e
You can play back the selected phrase by pressing the PLAY
button. This makes it possible to make the setting while
monitoring the actual tempo.
5.
When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose “NO,” then press the ENTER button.
Once the settings have been successfully modified, you’re
returned to the setting item selection screen.
6.
Press the MODE button.
This ends the setting process and returns you to the usual
screen.
* If you press the MODE button while making settings, a
message asking you to confirm that you want to exit the
setting process appears. Note that if you choose “YES,” then
press the ENTER button, you are returned to the usual screen,
and all setting changes you’ve made up to that point will be
discarded.
Phrase Name
This assigns a name to a phrase. You can enter a phrase name
of up to 12 characters. (For a phrase that has already been
recorded, the phrase name is the card name plus the phrase
number.)
Procedure for Setting the Phrase Name
1.
Use the SELECT dial to choose the phrase whose setting
you want to change.
2.
Press the MODE button.
The MODE indicator lights up.
3.
Use the SELECT dial to choose “1.9 Phrase Name,” then
press the dial.
You can reselect a phrase whose setting you want to change
by pressing the PAUSE (BACK) button. The entry position
(highlighted) moves to the phrase selection, so turn the
SELECT dial to reselect card A or B and the phrase number,
then press the dial.
4.
Turn the SELECT dial to choose a character. Press the
dial to confirm the selected character.
fig.11-g09e
Characters you can use:
Letters of the alphabet (upper
case) space numerals ! # $ % & ‘ ( ) @ ^ _ { }
FWD:
This advances the location for entering a character.
Pressing the dial advances the entry location by one.
AR-3000R_e.book 60 ページ ２０１０年３月１８日 木曜日 午後２時６分