Filter
Top Products
24
Turning the Power On and Off
Turning On the Power
941
* Once the connections have been completed (p. 40), turn on power to your various
devices in the order specified. By turning on devices in the wrong order, you risk
causing malfunction and/or damage to speakers and other devices.
Power on your equipment as described in the following. After the devices
are powered on, set the volumes to each connected devices equipment.
Connected devices
→
AR-3000R
→
Power Amplifier etc.
1
Confirm the volume levels on the AR-3000R and any amp or
mixer that is connected turned down to the lowest settings.
2
Press the POWER switch to turn on the power.
3
Watch the display.
* This display is only an example for illustrative purposes, The content of the display
will differ depending on the card settings.
Turning Off The Power
1
Confirm the volume levels on the AR-3000R and any amp or
mixer that is connected turned down to the lowest settings.
2
Switch off the power of the device in the reverse order of that
used to switch on the power.
The display will go dark, indicating that the power has been turned off.
This unit is equipped with
a protection circuit. A brief
interval (a few seconds)
after power up is required
b
efore the unit will operate
normally.
942
To avoid risk of electric
shock, do not touch the
connectors while the unit is
in operation.
If you need to turn off the
power completely, first
turn off the POWER switch,
then unplug the power
cord from the power outlet.
Refer to
Power Supply
(p.
5)
945
AR-3000R_e.book 24 ページ ２０１０年３月１８日 木曜日 午後２時６分