Filter
Top Products
46
Recording Audio
Procedure for Setting the RDAC-Mode
1
Put the unit into recording standby.
2
Turn the SELECT dial to choose “RDAC-Mode,” then press the
dial.
fig.09-g07e
3
Turn the SELECT dial to choose the RDAC-Mode (MODE1,
MODE2, MODE3, LINEAR, or H-LINEAR), then press the
ENTER button.
fig.09-g08e
* Pressing the PLAY button or the PAUSE button instead of the ENTER button
starts recording without locking in the setting.
* Please be aware that if you press the SELECT dial instead of the ENTER button, the
setting is not confirmed.
* 1 Important Notes When Recording with MODE2 or MODE3
Recording times available when in MODE2 are about the same as in
MODE3, or slightly longer. However, note that for phrases recorded in
MODE2, you cannot make settings for some of the items in the phrase
settings (Phrase Information (p. 54) and Phrase Editing (p. 67)).
<Unsettable Items for Phrases Recorded in MODE2>
●Phrase Information
• 1.3 Playback Point
• 1.5 Loop Play
●Phrase Editing
• 3.2 Phrase Truncate
• 3.4 Phrase Divide
• 3.5 Phrase Combine
• 3.6 Time Stretch
AR-3000R_e.book 46 ページ ２０１０年３月１８日 木曜日 午後２時６分