Filter
Top Products
68
Modifying Recorded Phrases (Phrase Settings)
Truncate acts upon and modifies the selected phrase itself.
Care must be taken, since once it has been executed, the
phrase cannot be restored to its original state.
You cannot make these settings for MODE2 phrases.
Phrase Truncate Procedure
1.
Press the MODE button.
The MODE indicator lights up.
2.
Use the SELECT dial to choose “3.2 Phrase Truncate,”
then press the dial.
3.
Turn the SELECT dial to choose the card containing the
beginning phrase for truncation, then press the dial.
fig.11-g26e
* If a card is inserted into either slot A or slot B, the entry
location (highlighted) advances to the phrase number.
Turn the SELECT dial to choose the beginning phrase for
truncation, then press the dial.
* Only phrases that can be executed are displayed.
Turn the SELECT dial to choose the final phrase for
truncation, then press the dial.
* Only phrases that can be executed are displayed.
* To truncate a single phrase, choose the same phrase for the
beginning phrase and the final phrase.
4.
When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose “NO,” then press the ENTER button.
Once the settings have been successfully modified, you’re
returned to the setting item selection screen.
5.
Press the MODE button.
This ends the setting process and returns you to the usual
screen.
* While making the settings, you can go back to the previous
entry location (highlighted) by pressing the PAUSE (BACK)
button.
* If you press the MODE button while making settings, a
message asking you to confirm that you want to exit the
setting process appears. Note that if you choose “YES,” then
press the ENTER button, you are returned to the usual screen,
and all setting changes you’ve made up to that point will be
discarded.
Copying a Phrase (Phrase Copy)
This copies a phrase. You can also copy a continuous group
of phrases in a batch.
Important Notes About Copying a Continuous Group of
Phrases in a Batch
Example:
Copying a continuous range of phrases from
A0050 to A0053
If A0052 happens to be a used empty phrase, then specify a
continuous group of three empty phrases as the beginning.
(The system seeks and displays only writable phrases.)
fig.11-14e
Important Notes About Copying Pattern Phrases or Song
Phrases
For pattern phrases and song phrases, only the combination
information is copied. Note that the actual constituent
phrases are not copied.
Example:
●
When a pattern phrase or song phrase on the same card is
copied
→
The actual constituent phrases exist, so playback is correct.
fig.11-15e
●
When a pattern phrase or song phrase is copied between
different cards (A
→
B)
→
Playback is correct while card A is inserted in the slot (and
A0060
A0061
A0062
Three continuous empty phrases at the write destination
A0050
A0051
empty
A0052
A0053
Phrase Copy
Copy range
A0015
A0016
A0017
A0019
A0018
A0012
A0030
Phrase Copy
constituent phrases
Pattern Phrase
Song Phrase
AR-3000R_e.book 68 ページ ２０１０年３月１８日 木曜日 午後２時６分