Filter
Top Products
65
Modifying Recorded Phrases (Phrase Settings)
Applications
portions.
• Use the playback point phrase settings (p. 55), and the
phrase-editing “Truncate feature (p. 67) to delete silent
portions that might be perceived as being odd.
Time-based Combinations (Song
Phrases)
You can paste together a number of phrases in temporal
(time-flow) order to create a new phrase (song phrase).
A song phrase is a stored combination of phrases that have
already been recorded. A song phrase is also treated as a
single phrase.
By creating song phrases, you can create time-based phrases,
while saving card memory space.
Specific Examples
Try setting the time frame for playback at 15 minutes.
Prepare phrases like the ones described below.
A0030: A 5-minute song
A0031: A 3-minute song
A0032: A 30-second announcement
A0033: A 15-second announcement
A0034: A 6-minute song
Paste these phrases on a time axis to create song phrase
A0035 having a total time of 15 minutes.
fig.11-13e
*1 If the start point (time) for phrase A0034 is set at a time
that overlaps with phrase A0031, playback of A0031 is
interrupted and playback of A0034 starts.
• You can assign up to 100 phrases to a single song phrase.
• You can assign a phrase any number of times to a single
song phrase, or to more than one song phrase.
Playback points and fade settings included in the phrase
information for phrases assigned to a song phrase remain in
effect, but other phrase information is disregarded. Note that
a phrase is assigned to a song phrase in the same state as
when it was just recorded (that is, the state before phrase-
information settings are made).
When you are creating a song phrase, you can choose actual
phrases from both card A and card B, but note that the
pattern phrase is not played back correctly if the card
containing the constituent phrase is not inserted at the time
of playback. (If a constituent phrase does not exist, silence is
heard until the start point [time] for the next phrase is
reached.)
Conditions for Creating Song Phrases
• Song phrases that have already been created cannot be
assigned to a song phrase.
• Pattern phrases that have already been created cannot be
assigned to a song phrase.
• MIDI phrases cannot be assigned to a song phrase.
Procedure for Creating a Song Phrase
1.
Press the MODE button.
The MODE indicator lights up.
2.
Use the SELECT dial to choose “2.2 Song Phrase,” then
press the dial.
3.
Turn the SELECT dial to choose the card containing an
empty phrase for creating a new song phrase or the song
phrase whose settings you want to change, then press the
dial.
* If a card is inserted into either slot A or slot B, the entry
location (highlighted) advances to the phrase number.
4.
Turn the SELECT dial to choose the empty phrase for
creating a new song phrase or the song phrase whose
settings you want to change, then press the dial.
* Only phrases that can be executed are displayed.
5.
Turn the SELECT dial to choose the assignment number
(from No. 001 to No. 100), then press the dial.
fig.11-g18e
END:
To finish making settings.
6.
Turn the SELECT dial to choose the card containing the
phrase you want to store, then press the dial.
fig.11-g19e
* If a card is inserted into either slot A or slot B, the entry
location (highlighted) advances to the phrase number.
Turn the SELECT dial to choose the phrase you want to store,
15 minutes
A0030 A0032A0033 A0034A0031
Song Phrase
A0035
: Start point of phrase (time)
: End point of song phrase (time)
* 1
AR-3000R_e.book 65 ページ ２０１０年３月１８日 木曜日 午後２時６分