Filter
Top Products
76
Making Settings and Edits for
Individual Cards
You can make batch settings and edits for individual cards.
If a card in AR-2000 format is inserted in either slot A or B (or
both), the AR-3000R can be used only for playback, and it is
not possible to record phrases or make any settings (except
for card conversion). Also, if you insert a card in AR-2000
format into slot A or B (or both) while making settings
(except for card conversion), note that the operation halts
with an error message, and the operation cannot be resumed
until the card or card is removed. To record or edit cards in
AR-2000 format on the AR-3000R, follow the steps in “Card
Convert” (p. 78).
Making a Card Usable on the AR-
3000R (Card Format)
When you use a new card or a card used previously on a
device other than the unit, you must first format the card.
For an explanation of how to format the card, refer to
“Formatting a Card” (p. 31).
Performing formatting erases all data on the card. Before you
format the card, make sure it contains no data you don’t
want to lose.
Deleting All Phrases on a Card
(Card Delete)
This deletes all the phrases on a card.
Please be aware that performing a Card Delete operation
deletes all phrase data. (This returns the card to the state it
was in when freshly formatted.)
Card Delete Procedure
1.
Press the MODE button.
The MODE indicator lights up.
2.
Use the SELECT dial to choose “4.2 Card Delete,” then
press the dial.
3.
Turn the SELECT dial to choose the card to delete (A or
B), then press the dial.
fig.12-g01e
4.
When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose “NO,” then press the ENTER button.
When the operation ends, the display returns to the setting
item selection screen.
5.
Press the MODE button.
This ends the setting process and returns you to the usual
screen.
* Pressing the MODE button while making the setting displays
a prompt asking you whether you want to quit making the
setting. Note that choosing “YES” and pressing the ENTER
button returns you to the usual screen, discarding any
settings made up to that point.
Copying a Card (Card Copy)
This copies the data on the card in slot A to the card in slot B.
Card A and card B don’t have to be the same size (capacity),
but unless the usable space on card B is larger than the space
used on card A, you cannot copy everything on card A to
card B.
Please be aware that performing a “Card Copy” operation
deletes (overwrites) the data on card B.
A card in AR-2000 format cannot be copied as-is. To copy a
card in AR-2000 format, use Card Convert to convert it to
AR-3000 format, then copy the card.
Card Convert
→
p. 78
Card Copy Procedure
1.
Press the MODE button.
The MODE indicator lights up.
2.
Use the SELECT dial to choose “4.3 Card Copy (A
→
B),”
then press the dial.
3.
Insert the card to copy from into slot A and the card to
copy to into slot B, then press the SELECT dial.
* Be sure to insert the cards into the correct slots.
4.
When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose “NO,” then press the ENTER button.
When the operation ends, the display returns to the setting
item selection screen.
AR-3000R_e.book 76 ページ ２０１０年３月１８日 木曜日 午後２時６分