Filter
Top Products
77
Making Settings and Edits for Individual Cards
Applications
5.
Press the MODE button.
This ends the setting process and returns you to the usual
screen.
* Pressing the MODE button while making the setting displays
a prompt asking you whether you want to quit making the
setting. Note that choosing “YES” and pressing the ENTER
button returns you to the usual screen, discarding any
settings made up to that point.
Copying Just the Settings (Setting
Copy)
This copies the following setting information stored on the
card in slot A to the card in slot B.
• Control input settings
• MIDI settings
• RS-232C settings
• AR-LINK settings
• System settings
You cannot copy settings to a card that has a different format
(that is, you cannot copy settings from a card in AR-2000
format to a card in AR-3000 format, or vice versa).
Setting Copy Procedure
1.
Press the MODE button.
The MODE indicator lights up.
2.
Use the SELECT dial to choose “4.4 Setting Copy
(A
→
B),” then press the dial.
3.
Insert the card to copy from into slot A and the card to
copy to into slot B, then press the SELECT dial.
* Be sure to insert the cards into the correct slots.
4.
When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose “NO,” then press the ENTER button.
When the operation ends, the display returns to the setting
item selection screen.
5.
Press the MODE button.
This ends the setting process and returns you to the usual
screen.
* Pressing the MODE button while making the setting displays
a prompt asking you whether you want to quit making the
setting. Note that choosing “YES” and pressing the ENTER
button returns you to the usual screen, discarding any
settings made up to that point.
Protecting a Card (Card Protect)
This prohibits such card operations as saving, overwriting,
deleting, and editing. (However, playback and copying
phrases to another card are still possible.)
Procedure for Making the Card Protect Setting
1.
Press the MODE button.
The MODE indicator lights up.
2.
Use the SELECT dial to choose “4.5 Card Protect,” then
press the dial.
3.
Turn the SELECT dial to choose the card you want to
protect (A or B), then press the dial.
fig.12-g02e
4.
Turn the SELECT dial to choose Card Protect (OFF or
ON), then press the dial.
5.
When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose “NO,” then press the ENTER button.
When you’re finished making the setting, the display returns
to the setting item selection screen.
6.
Press the MODE button.
This ends the setting process and returns you to the usual
screen.
* While making the settings, you can go back to the previous
entry position (highlighted) by using the PAUSE (BACK)
button.
* Pressing the MODE button while making the setting displays
a prompt asking you whether you want to quit making the
setting. Note that choosing “YES” and pressing the ENTER
button returns you to the usual screen, discarding any
settings made up to that point.
Changing the Name of a Card
(Card Name)
This changes the name assigned to a card when it was
formatted (p. 31).
When you record a phrase, this card name is automatically
added to the beginning of the phrase name. You can enter a
card name of up to eight characters.
Example:
Card name before change: MESSAGE
→
Phrase name: MESSAGE 1
Card name after change: ENTRANCE
AR-3000R_e.book 77 ページ ２０１０年３月１８日 木曜日 午後２時６分