Filter
Top Products
66
Modifying Recorded Phrases (Phrase Settings)
then press the dial.
* Only assignable phrases are displayed.
-----:
If a phrase is assigned at the assignment number you
selected in step 5, then this cancels the phrase assignment.
(However, even after the assignment is canceled, point
information is retained.)
STOP:
Select this when you want to specify an ending point
(time) for the song phrase. (In the specific example on p. 65,
this is set at 15 minutes in step 7.)
7.
Turn the SELECT dial to set the point (time) to start the
assigned phrase, then press the dial.
fig.11-g20e
If you selected Stop in step 6, then set the end point (time) for
the song phrase and press the dial. (In the specific example
on p. 65, this is set at 00 h 15 m 00 s 00 f 0 sf.)
8.
Repeat steps 5 through 7 to assign phrases.
• The screen displays the total time for the song phrase.
fig.11-g21e
9.
To cancel the save process, then in step 5, turn the
SELECT dial to choose END, then press the dial.
10.
When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose “NO,” then press the ENTER button.
Once the settings have been successfully modified, you’re
returned to the setting item selection screen.
11.
Press the MODE button.
This ends the setting process and returns you to the usual
screen.
* While making the settings, you can go back to the previous
entry location (highlighted) by pressing the PAUSE (BACK)
button.
* If you press the MODE button while making settings, a
message asking you to confirm that you want to exit the
setting process appears. Note that if you choose “YES,” then
press the ENTER button, you are returned to the usual screen,
and all setting changes you’ve made up to that point will be
discarded.
Total Time
AR-3000R_e.book 66 ページ ２０１０年３月１８日 木曜日 午後２時６分