Filter
Top Products
67
Modifying Recorded Phrases (Phrase Settings)
Applications
Modifying Phrases Themselves
(Phrase Edit)
This is used to modify (edit) recorded phrases.
For settings when a card is formatted, refer to p. 135.
To confirm phrases when making settings, you can use the
PLAY and STOP buttons to play and stop phrases and the
PAUSE button to pause phrases (audio phrases only), and
the SELECT dial to move the playback location forward and
backward (audio phrases only). Note that you cannot change
settings during phrase playback.
• Items that can be set differ according to the type of
phrase (audio phrase, MIDI phrase, pattern phrase, or
song phrase). Also refer to the Phrase Information/
Phrase Setting Correspondence Table (p. 75).
• When editing a phrase, you cannot overwrite a phrase
itself except by using the phrase delete or truncate
functions. Make sure there is enough free space to carry
out phrase editing.
• If a card in AR-2000 format is inserted in either slot A or
B (or both), the AR-3000R can be used only for playback,
and it is not possible to record phrases or make any
settings (except for card conversion). Also, if you insert a
card in AR-2000 format into slot A or B (or both) while
making settings (except for card conversion), operation
will halt with an error message, and cannot be resumed
until such cards are removed. To record or edit cards in
AR-2000 format on the AR-3000R, follow the steps in
“Card Convert” (p. 78).
• When the phrase editing described below is carried out,
the Phrase Information is not updated.
Phrase Divide
Phrase Combine
Phrase Convert
Time Stretch
Deleting a Phrase (Phrase Delete)
This deletes a phrase. You can also delete a continuous group
of phrases in a batch.
Procedure for Deleting a Phrase
1.
Press the MODE button.
The MODE indicator lights up.
2.
Use the SELECT dial to choose “3.1 Phrase Delete,” then
press the dial.
3.
Turn the SELECT dial to choose the card containing the
beginning phrase you want to delete, then press the dial.
fig.11-g22e
* If a card is inserted into either slot A or slot B, the entry
location (highlighted) advances to the phrase number.
Turn the SELECT dial to choose the beginning phrase to
delete, then press the dial.
* Only phrases that can be executed are displayed.
Turn the SELECT dial to choose the final phrase to delete,
then press the dial.
fig.11-g23e
* Only phrases that can be executed are displayed.
* To delete a single phrase, choose the same phrase for the
beginning phrase and the final phrase.
4.
When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose “NO,” then press the ENTER button.
Once the settings have been successfully modified, you’re
returned to the setting item selection screen.
5.
Press the MODE button.
This ends the setting process and returns you to the usual
screen.
* While making the settings, you can go back to the previous
entry location (highlighted) by pressing the PAUSE (BACK)
button.
* If you press the MODE button while making settings, a
message asking you to confirm that you want to exit the
setting process appears. Note that if you choose “YES,” then
press the ENTER button, you are returned to the usual screen,
and all setting changes you’ve made up to that point will be
discarded.
Deleting Audio Outside the
Playback Points (Phrase
Truncate)
This deletes data outside the points set with the Playback
Point phrase information (p. 55). You can also truncate a
continuous group of phrases in a batch.
fig.11-17e
Start End
Playback passage
Phrase
AR-3000R_e.book 67 ページ ２０１０年３月１８日 木曜日 午後２時６分