Filter
Top Products
142
MIDI Implementation
❍
LOCATE (MCP)
format2 - LOCATE [TARGET]
Status
Data Bytes Status
F0H 7FH, dev, 06H, 44H, 06H F7H
01H, hrH, mnH, scH, frH, ffH
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Real time Header
dev device ID (7FH)
06H MMC Command Message
44H LOCATE (MCP)
06H Number of byte
01H [TARGET] sub command
hrH Standard time with Sub Frame
mnH
scH
frH
ffH
F7H EOX (End of System Exclusive Message)
* When the location is moved, a LOCATE message is transmitted.
* MIDI phrases and pattern phrases are not transmitted when Dual Mono mode is
selected.
3. Receive data (MIDI Recorder Section)
3.1 Message memorized during recording
■
Channel Voice Message
●
Note Off
Status Second Third
8nH kkH vvH
9nH kkH 00H
n = MIDI Channel No. : 0H - FH (ch.1 - ch.16)
kk = Note No. : 00H - 7FH (0 - 127)
vv = Velocity : 00H - 7FH (1 - 127)
●
Note On
Status Second Third
9nH kkH vvH
n = MIDI Channel No. : 0H - FH (ch.1 - ch.16)
kk = Note No. : 00H - 7FH (0 - 127)
vv = Velocity : 01H - 7FH (1 - 127)
●
Polyphonic Key Pressure
Status Second Third
AnH kkH vvH
n = MIDI Channel No. : 0H - FH (ch.1 - ch.16)
kk = Note No. : 00H - 7FH (0 - 127)
vv = value : 00H - 7FH (0 - 127)
●
Control Change
status Second Third
BnH kkH vvH
n = MIDI Channel No. : 0H - FH (ch.1 - ch.16)
kk = Controller No. : 00H - 7FH (0 - 127)
vv = value : 00H - 7FH (0 - 127)
●
Program Change
Status Second Third
CnH ppH vvH
n = MIDI Channel No. : 0H - FH (ch.1 - ch.16)
pp = Program No. : 00H - 7FH (0 - 127)
●
Channel Pressure
Status Second
BnH kkH
n = MIDI Channel No. : 0H - FH (ch.1 - ch.16)
vv = value : 00H - 7FH (0 - 127)
●
Pitch Bend Change
Status Second
EnH llH
n = MIDI Channel No. : 0H - FH (ch.1 - ch.16)
■
Channel Mode Message
●
All Sound Off
Status Second Third
BnH 78H 00H
n = MIDI channel No. : 0H -FH (ch.1 --ch 16)
●
Reset All Controller
Status Second Third
BnH 78H 00H
n = MIDI channel No. : 0H -FH (ch.1 --ch 16)
●
Local On / Off
Status Second Third
BnH 7AH vvH
n = MIDI channel No. : 0H -FH (ch.1 --ch 16)
vv = value : 00H, 7FH (OFF, ON)
●
MONO
Status Second Third
BnH 7EH mmH
n = MIDI channnel No. : 0H -FH (ch.1 --ch 16)
mm = mono number : 00H - 10H (0 - 16)
* The same processing will be carried out as when All Notes Off is received.
●
POLY
Status Second Third
BnH 7EH 00H
n = MIDI channel No. : 0H -FH (ch.1 --ch 16)
mm = mono number : 00H - FH (0 - 16)
* The same processing will be carried out as when All Notes Off is received.
■
System Exclusive Message
Status
Data Bytes Status
F0H iiH, ddH,.., eeH F7H
FOH : System Exclusive Message status
iiH ID Number : an ID number (manufacturer ID) to indicate the manufacturer whose
Exclusive message this is. Roland’s manufacturer ID is 41H.
ID numbers 7EH and 7FH are extensions of the MIDI standard;
Universal Non-real time Messages (7EH) and Universal Real time
Messages (7FH).
dd,.., ee = Data : 00H-7FH (0-127)
F7H : EOX (End of Exclusive Message)
3.2 Message not memorized during
recording
■
Channel Mode Message
●
All Note Off
Status
Second Third
BnH 78H 00H
n = MIDI channel No. : 0H -FH (ch.1 --ch 16)
* Note Off is generated for any note not set to OFF, and this note off is stored.
●
OMNI OFF
Status
Second Third
BnH 78H 00H
n = MIDI channel No. : 0H -FH (ch.1 --ch 16)
* The same processing will be carried out as when All Notes Off is received.
●
OMNI ON
Status
Second Third
BnH 7AH vvH
n = MIDI channel No. : 0H -FH (ch.1 --ch 16)
vv = value : 00H, 7FH (OFF, ON)
* The same processing will be carried out as when All Notes Off is received.
3.3 Recognized message for remote
control
■
System Real time Message
●
Start
status
F8H
* Not received when recording mode is not “Standby”.
●
Continue
status
FBH
AR-3000R_e.book 142ページ ２０１０年３月１８日 木曜日 午後２時６分