Filter
Top Products
73
Modifying Recorded Phrases (Phrase Settings)
Applications
5.
Turn the SELECT dial to choose the card containing the
beginning phrase you want to convert, then press the
dial.
fig.11-g45e
* If a card is inserted into either slot A or slot B, the entry
location (highlighted) advances to the phrase number.
Turn the SELECT dial to choose the beginning phrase to
convert, then press the dial.
* Only phrases that can be executed are displayed.
Turn the SELECT dial to choose the final phrase to convert,
then press the dial.
* Only phrases that can be executed are displayed.
* To convert a single phrase, choose the same phrase for the
beginning phrase and the final phrase.
6.
Turn the SELECT dial to choose the write-destination
card, then press the dial.
fig.11-g46e
* If a card is inserted into either slot A or slot B, the entry
location (highlighted) advances to the phrase number.
Turn the SELECT dial to choose the beginning phrase for the
write destination, then press the dial.
fig.11-g47e
* Only phrases that can be executed are displayed.
7.
When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose “NO,” then press the ENTER button.
Once the settings have been successfully modified, you’re
returned to the setting item selection screen.
8.
Press the MODE button.
This ends the setting process and returns you to the usual
screen.
* While making the settings, you can go back to the previous
entry location (highlighted) by pressing the PAUSE (BACK)
button.
* If you press the MODE button while making settings, a
message asking you to confirm that you want to exit the
setting process appears. Note that if you choose “YES,” then
press the ENTER button, you are returned to the usual screen,
and all setting changes you’ve made up to that point will be
discarded.
Even if there are phrases in “Phrase range” that have the
same RDAC-Mode as the set RDAC-Mode, it is written
unchanged as a new phrase.
●
Converting the Recording Type
1.
Press the MODE button.
The MODE indicator lights up.
2.
Use the SELECT dial to choose “3.7 Phrase Convert,”
then press the dial.
3.
Turn the SELECT dial to choose the recording type, then
press the dial.
fig.11-g47ae
4.
Turn the SELECT dial to choose the recording-type
conversion method (STEREO
→
MONO, STEREO
→
MONO 1, 2, or MONO 1, 2
→
STEREO), then press the
dial.
fig.11-g48e
When “STEREO
→
MONO” Is Selected
5.
Turn the SELECT dial to choose the card containing the
beginning phrase you want to convert, then press the
dial.
fig.11-g49e
* If a card is inserted into either slot A or slot B, the entry
location (highlighted) advances to the phrase number.
Turn the SELECT dial to choose the beginning phrase to
convert, then press the dial.
* Only phrases that can be executed are displayed.
Turn the SELECT dial to choose the final phrase to convert,
then press the dial.
* Only phrases that can be executed are displayed.
* To convert a single phrase, choose the same phrase for the
beginning phrase and the final phrase.
6.
Turn the SELECT dial to choose the write-destination
card, then press the dial.
fig.11-g50e
* If a card is inserted into either slot A or slot B, the entry
location (highlighted) advances to the phrase number.
AR-3000R_e.book 73 ページ ２０１０年３月１８日 木曜日 午後２時６分