Filter
Top Products
71
Modifying Recorded Phrases (Phrase Settings)
Applications
5.
Turn the SELECT dial to choose the write-destination
card, then press the dial.
fig.11-g34e
* If a card is inserted into either slot A or slot B, the entry
location (highlighted) advances to the phrase number.
Turn the SELECT dial to choose the write-destination phrase,
then press the dial.
* Only phrases that can be executed are displayed.
6.
When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose “NO,” then press the ENTER button.
Once the settings have been successfully modified, you’re
returned to the setting item selection screen.
7.
Press the MODE button.
This ends the setting process and returns you to the usual
screen.
* While making the settings, you can go back to the previous
entry location (highlighted) by pressing the PAUSE (BACK)
button.
* If you press the MODE button while making settings, a
message asking you to confirm that you want to exit the
setting process appears. Note that if you choose “YES,” then
press the ENTER button, you are returned to the usual screen,
and all setting changes you’ve made up to that point will be
discarded.
Expanding or Compressing the
Playback Time Without Changing
the Pitch (Time Stretch)
This expands or compresses a phrase’s playback time without
changing its pitch. You can set a value within a range of -
20.0% to +20.0% of the phrase’s original playback time.
* The playback time after stretching is displayed simultaneously.
The displayed playback time after stretching is only a rough
guide, and may not match the actual playback time after
conversion.
You cannot make these settings for MODE2 phrases.
Time Stretch Procedure
1.
Press the MODE button.
The MODE indicator lights up.
2.
Use the SELECT dial to choose “3.6 Time Stretch,” then
press the dial.
3.
Turn the SELECT dial to choose the card containing the
phrase whose time you want to stretch, then press the
dial.
fig.11-g37e
* If a card is inserted into either slot A or slot B, the entry
location (highlighted) advances to the phrase number.
Turn the SELECT dial to choose the phrase whose time you
want to stretch, then press the dial.
* Only phrases that can be executed are displayed.
4.
Turn the SELECT dial to set the degree of stretching
(from -20.0% to +20.0%), then press the dial.
fig.11-g38e
5.
Turn the SELECT dial to choose the write-destination
card, then press the dial.
fig.11-g39e
* Only executable cards are displayed.
Turn the SELECT dial to choose the write-destination phrase,
then press the dial.
* Only phrases that can be executed are displayed.
6.
When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose “NO,” then press the ENTER button.
Once the settings have been successfully modified, you’re
returned to the setting item selection screen.
7.
Press the MODE button.
This ends the setting process and returns you to the usual
screen.
* While making the settings, you can go back to the previous
entry location (highlighted) by pressing the PAUSE (BACK)
button.
* If you press the MODE button while making settings, a
message asking you to confirm that you want to exit the
setting process appears. Note that if you choose “YES,” then
press the ENTER button, you are returned to the usual screen,
and all setting changes you’ve made up to that point will be
discarded.
Original playback time
Playback time after stretching
AR-3000R_e.book 71 ページ ２０１０年３月１８日 木曜日 午後２時６分