Filter
Top Products
69
Modifying Recorded Phrases (Phrase Settings)
Applications
the actual phrases are present), but if card A is removed or
card B is inserted into slot A, the actual constituent phrases
are no longer present, and so playback is not correct. To
ensure that a pattern phrase or song pattern copied to a
different card (A
→
B) is played back correctly, copy the
actual constituent phrases separately to card B.
In such cases, with regard to the constituent phrases of the
pattern phrases and song phrases, the actual phrases should
be reregistered after the copying is complete.
fig.11-16e
Procedure for Copying a Phrase
1.
Press the MODE button.
The MODE indicator lights up.
2.
Use the SELECT dial to choose “3.3 Phrase Copy,” then
press the dial.
3.
Turn the SELECT dial to choose the card containing the
beginning phrase of the copy source, then press the dial.
fig.11-g24e
* If a card is inserted into either slot A or slot B, the entry
location (highlighted) advances to the phrase number.
Turn the SELECT dial to choose the beginning phrase at the
copy source, then press the dial.
* Only phrases that can be executed are displayed.
Turn the SELECT dial to choose the final phrase of the copy
source, then press the dial.
* Only phrases that can be executed are displayed.
* To copy a single phrase, choose the same phrase for the
beginning phrase and the final phrase.
4.
Turn the SELECT dial to choose the write-destination
card, then press the dial.
fig.11-g25e
* If a card is inserted into either slot A or slot B, the entry
location (highlighted) advances to the phrase number.
Turn the SELECT dial to choose the beginning phrase for the
write destination, then press the dial.
* Only phrases that can be executed are displayed.
5.
When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose “NO,” then press the ENTER button.
Once the settings have been successfully modified, you’re
returned to the setting item selection screen.
6.
Press the MODE button.
This ends the setting process and returns you to the usual
screen.
* While making the settings, you can go back to the previous
entry location (highlighted) by pressing the PAUSE (BACK)
button.
* If you press the MODE button while making settings, a
message asking you to confirm that you want to exit the
setting process appears. Note that if you choose “YES,” then
press the ENTER button, you are returned to the usual screen,
and all setting changes you’ve made up to that point will be
discarded.
Dividing a Phrase (Phrase Divide)
This splits a phrase at the location you specify, creating two
phrases.
fig.11-19e
You cannot make these settings for MODE2 phrases.
Procedure for Dividing a Phrase
1.
Press the MODE button.
The MODE indicator lights up.
2.
Use the SELECT dial to choose “3.4 Phrase Divide,” then
press the dial.
3.
Turn the SELECT dial to choose the card containing the
phrase you want to split, then press the dial.
fig.11-g28e
* If a card is inserted into either slot A or slot B, the entry
location (highlighted) advances to the phrase number.
Turn the SELECT dial to choose the phrase to split, then
press the dial.
B0001
A0015
A0016
A0017
A0019
A0018
A0012
Pattern Phrase
Song Phrase
constituent phrases
Phrase Copy
Deviding point
Phrase 1
Phrase 2
Phrase 3
Two phrases
AR-3000R_e.book 69 ページ ２０１０年３月１８日 木曜日 午後２時６分