Filter
Top Products
107
Controlling the AR-3000R Using MIDI Signals (MIDI Control)
Applications
Although you can select phrases from Card A as well as Card
B, note that playback will not work properly if the card
inserted when the phrase was registered is not inserted at
playback. (If the phrase is not saved, the playback signal is
ignored).
Settings When Formatting Cards (in Slot A)
fig.16-03e
MIDI Note Map (Phrase Assignments from
Program Changes and Note Numbers)
fig.16-04e
* The 1,000 phrases on card A are assigned to Program Changes
21 through 30, and the phrase assignments cannot be changed.
* The 1,000 phrases on card B are assigned to Program Changes
71 through 80, and the phrase assignments cannot be changed.
* For compatibility with the AR-2000 format, 500 phrases on
card A and 500 phrases on card B are assigned to Program
Changes 2 through 6, and 7 through 11, and the phrase
assignments cannot be changed.
* With Program Change 128, playback of the phrase in progress
is stopped by switching any note number on.
Procedure for Making the MIDI Note Map
Settings
1.
Press the MODE button.
The MODE indicator lights up.
2.
Use the SELECT dial to choose “6.2 MIDI Note Map,”
then press the dial.
3.
Turn the SELECT dial to choose the note number you
want to set, then press the dial.
fig.16-g02e
•
C-1 through G9:
Note number
•
End:
To finish making settings.
•
Reset:
This restores the settings at the time the card was
formatted.
•
Clear:
This erases all settings.
4.
Turn the SELECT dial to choose the card containing the
phrase you want to store, then press the dial.
fig.16-g03e
5.
Turn the SELECT dial to choose the phrase you want to
store, then press the dial.
6.
Repeat steps 3 and 4 to assign phrases.
7.
To cancel the save process, then in step 3, turn the
SELECT dial to choose END, then press the dial.
fig.16-g04e
8.
When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose “NO,” then press the ENTER button.
Once the settings have been successfully modified, you’re
returned to the setting item selection screen.
Program Change 1
C-1 A0001
C#-1 A0002
Note
Number
Phrase
D-1 A0003
::
A0128
G9
1
Program
Change
Note No.
Phrase No.
C-1 – G9 You can assign 128 phrases
however you like.
C-1 C0 C1 C2 C3 C4 C5 C6 C7 D#7
100 phrase all
12 12 12 12 12 12 12 12 4
<Program Change 21–30, 71–80, 2–11>
C-1 C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 G9
128 phrase all
12 12 12 12 12 12 12 12 812 12
<Program Change 1>
21
22
23
24
25
26
27
28
29
30
71
72
73
74
75
76
77
78
79
80
2
3
4
5
6
7
8
9
10
11
128
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – D#7
C-1 – G9
A0001 – A0100
A0101 – A0200
A0201 – A0300
A0301 – A0400
A0401 – A0500
A0501 – A0600
A0601 – A0700
A0701 – A0800
A0801 – A0900
A0901 – A1000
B0001 – B0100
B0101 – B0200
B0201 – B0300
B0301 – B0400
B0401 – B0500
B0501 – B0600
B0601 – B0700
B0701 – B0800
B0801 – B0900
B0901 – B1000
A0001 – A0100
A0101 – A0200
A0201 – A0300
A0301 – A0400
A0401 – A0500
B0001 – B0100
B0101 – B0200
B0201 – B0300
B0301 – B0400
B0401 – B0500
The phrase being plaued back
is stopped.
AR-3000R_e.book 107ページ ２０１０年３月１８日 木曜日 午後２時６分