Filter
Top Products
12
Panel Descriptions
Front Panel
fig.2-01e
1. Mic In Jack
This is for connecting a microphone during audio recording.
→
“Recording Audio” (p. 40)
2. INPUT VOLUME Knobs
The outer control adjusts the volume level of the signal input to
the Line In jack.
The inner control adjusts the microphone-input volume level.
fig.2-02e
→
“Recording Audio” (p. 40)
The volume level of signals input to the Digital In jack cannot
be changed.
3. Card Access Indicator
This lights up when the unit reads or writes to a card.
When the CF card drive is in operation (that is, when the
access indicator is illuminated), do not try to take out the
card or turn off the power. Doing so may damage the card.
4. Card Slots
Do not insert any object other than a CF card (such as a wire,
coin, or different type of card) into the card slots. Doing so
may damage the unit.
5. Card Eject Buttons
6. Display
→
“Viewing the Basic Screen” (p. 35)
7. PLAY Button and PLAY Indicator
• Pressing the PLAY button plays back a phrase. When
playback is paused, pressing the PLAY or PAUSE button
restarts playback.
• Holding down the STOP button and pressing the PLAY
button puts the unit in recording standby. Pressing the
PLAY or PAUSE button while in this state starts
recording.
8. PAUSE/BACK Button and PAUSE Indicator
• Pressing the PAUSE button during playback of an audio
phrase pauses playback. Playback resumes when the
PLAY or PAUSE button is pressed again.
• Pressing the PLAY or PAUSE button while in the
recording-standby state starts recording.
• When you are making settings, this button is used to
make the insertion point (highlighted) go back one step.
12
3
4
5
6
7
9
8
10
11
12 13 14
15
16
17
(outer ring)
LINE Volume
MIC Volume
(inner ring)
962a
* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
AR-3000R_e.book 12 ページ ２０１０年３月１８日 木曜日 午後２時６分