Filter
Top Products
56
Modifying Recorded Phrases (Phrase Settings)
Levels of -45 dBm or lower are treated as silent.
fig.11-03e
You can use the phrase-editing Truncate function (p. 67) to
delete data outside the set points.
You cannot make these settings for MODE2 phrases.
Procedure for Setting Playback Point
1.
Use the SELECT dial to choose the phrase whose setting
you want to change.
2.
Press the MODE button.
The MODE indicator lights up.
3.
Use the SELECT dial to choose “1.3 Playback Point,” then
press the dial.
You can reselect the phrase whose setting you want to
change by pressing the PAUSE (BACK) button. The entry
position (highlighted) moves to the phrase selection, so turn
the SELECT dial to reselect card A or B and the phrase
number, then press the dial.
When Making the Settings Manually
4.
Turn the SELECT dial to choose MANUAL as the
playback-point setting method, then press the dial.
fig.11-g03e
Turn the SELECT dial to set the start position (time), then
press the dial.
* Each press of the BACK button moves the cursor (highlighted)
in the sequence of sf
→
f
→
s
→
m
→
h. Pressing the dial while
the cursor (highlighting) is at the “sf” position moves the end
position setting.
* The frame display varies according to the setting for the MIDI
Time Code (MTC) frame rate.
Turn the SELECT dial to set the end position (time), then
press the dial.
While setting the points, you can set the points while
listening to the audio by using the SCRUB playback mode (p.
54).
5.
When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose “NO,” then press the ENTER button.
Once the settings have been successfully modified, you’re
returned to the setting item selection screen.
6.
Press the MODE button.
This ends the setting process and returns you to the usual
screen.
* While making the settings, you can go back to the previous
entry location (highlighted) by pressing the PAUSE (BACK)
button.
* If you press the MODE button while making settings, a
message asking you to confirm that you want to exit the
setting process appears. Note that if you choose “YES,” then
press the ENTER button, you are returned to the usual screen,
and all setting changes you’ve made up to that point will be
discarded.
When Making the Settings Automatically
7.
Turn the SELECT dial to choose Auto as the playback-
point setting method, then press the dial.
fig.11-g03e
The start and end locations are set automatically.
fig.11-g03ae
You can make fine adjustments in the set points by pressing
the PAUSE (BACK) button, moving the entry position
(highlighted) to the start or end location, and using the
SCRUB playback mode (p. 54).
8.
When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose “NO,” then press the ENTER button.
Once the settings have been successfully modified, you’re
returned to the setting item selection screen.
9.
Press the MODE button.
This ends the setting process and returns you to the usual
screen.
* While making the settings, you can go back to the previous
entry location (highlighted) by pressing the PAUSE (BACK)
button.
Start End
Playback passag
Phrase
Silent portion Silent portion
AR-3000R_e.book 56 ページ ２０１０年３月１８日 木曜日 午後２時６分