Filter
Top Products
Chapter C: Sonos Setup Using Controller C-5
Setup with a NAS Device (no router)
Step 1: Apply power to a Sonos component
Attach the power cord to a ZonePlayer or ZoneBridge and plug into a wall outlet.
Step 2: Set up your Sonos system using the Sonos Controller
1. From the Welcome screen on your Sonos Controller, press the OK button located
in the center of the scroll wheel.
2. Follow the Controller’s on-screen prompts to connect your ZonePlayer or
ZoneBridge.
ZoneBridge Setup
•You will be prompted to press and release the Connect button on
top of the ZoneBridge. The indicator lights will flash green and white
while the ZoneBridge is connecting.
ZonePlayer Setup
•You will be prompted to press and release the Mute and Volume Up
buttons simultaneously on the ZonePlayer.
•The Mute and ZonePlayer Status indicator lights will flash green
and white while the ZonePlayer is connecting. You can release the
buttons as soon as they start to blink (approximately 1 second.)
•When the ZonePlayer has been successfully added to your music
system, the Mute indicator will go out and the ZonePlayer Status
indicator will change to solid white.