Filter
Top Products
Sonos Multi-Room Music System User GuideA-2
Using your Desktop Controller:
1. From the Music menu, select Set Up Music Library.
2. Select the music folder(s) stored on this computer, and click Remove.
3. Next, re-add the share by selecting Add a Share.
4. Select Add music stored on this computer and click Next.
5. Select the music folder you just removed, and click Next.
6. Click Finish.
Wired Sonos component not detected during setup
A network or firewall issue may be preventing the Sonos component that is connected
to your router from joining your Sonos system. You can try the steps below to resolve
this issue.
(If this is a wireless ZonePlayer, you can try moving the ZonePlayers closer together, or
wire the ZonePlayer temporarily to see if the problem is related to wireless
interference.)
If you are still experiencing problems, please contact the Sonos Customer Service
Center.
1. Check the firewall
Firewall software installed on the computer may be blocking the ports that Sonos uses
to operate. First disable all your firewalls and try to connect again. If this resolves the
problem, you should configure your firewall to work with the Sonos Desktop Controller
software. Click "Firewall Information" on page 6-9(Macintosh) or "Firewall Information"
on page 5-9 (PC) for help with this step. If this does not resolve the problem, try step 2
below.