Filter
Top Products
15. Disassemble and pack the lift tool into the shipping crate. Follow the return
instructions provided.
Note: For turning on the power and for the configuration instructions, see
Chapter 3, “Starting and configuring the SAN384B,” on page 33.
Attention: Do not connect the SAN384B to the network until the IP addresses are
correctly set.
Port numbering
Table 7 provides a list of available port blades for the SAN384B.
Table 7. Port blades available on the SAN384B
Blade label IBM blade name Feature code
FC8-16 16 port 8Gb Switch Blade 3816
FC8-32 32 port 8Gb Switch Blade 3832
FC8-48 48 port 8Gb Switch Blade 3848
FC8-64 64 port 8Gb Switch Blade 3864
FC10-6 10Gb Fibre Channel Blade 3870
FR4-18i FC Routing Blade 3850
384b016
Figure 15. Attaching the vertical cable management finger assemblies to the cabinet rails
28 SAN384B Installation, Service, and User Guide
|